SPECIFICATIONS

Product Name: Strip-Cut Paper Shredder (10-Sheet Capacity, P-2 Security Level, Low Noise)

Product Overview

This strip-cut paper shredder is designed for home and small office use with relatively low operating noise. It shreds up to 10 sheets (70g/m²) at once and can also handle staples, credit cards, and CDs. Features a P-2 security level, US-patented cutter technology, and anti-jam design. Comes with a 3.17-gallon transparent waste bin and supports approximately 5 minutes of continuous shredding.

Key Specifications

Item    Specification

Product Dimensions    14.57 × 6.30 × 11.82 in
Weight    5.30 lbs

Model    SD108P
Shred Type    Strip-Cut
Max Sheet Capacity    10 Sheets (70g/m²)
Security Level    P-2
Shred Size    6 × 297 mm (Approx. 15/64 × 11-22/32 in)
Continuous Run Time    Approx. 5 Minutes
Overheat Protection    Auto Start, Approx. 30 Min Cooling Time
Waste Bin Capacity    3.17 Gallons (with Transparent Window)
Control Modes    Auto/Off/Reverse/Fwd
Materials Accepted    Paper, Staples, Credit Cards, CDs

Features

Low-Noise Operation: Designed for quiet use in home or office environments.

10-Sheet Capacity: Shreds up to 10 sheets (70g/m²) at once without the need to remove staples or clips. Also handles credit cards and CDs.

P-2 Security Level: Shreds paper into strips of approximately 6×297 mm, meeting P-2 security standards. Equipped with US-patented cutter technology for anti-jam performance.

Continuous Run & Overheat Protection: Supports approximately 5 minutes of continuous operation. Overload protection automatically activates when needed, with an approximate 30-minute cooldown period. Includes a 4-mode switch (Auto/Off/Reverse/Fwd) for easier jam clearing and feed control.

Transparent Bin & Support: Features a 3.17-gallon waste bin with a transparent window for easy monitoring. Comes with 1-year replacement warranty and customer support.

Package Contents

1 × Shredder Main Unit

1 × Waste Bin

1 × User Manual

Usage Notes

Do not exceed the recommended capacity of 10 sheets per pass to help prevent jams.

After approximately 5 minutes of continuous use, allow the unit to cool before resuming.

If overheating protection activates, wait approximately 30 minutes for the unit to cool down.

Do not insert wet paper, fabric, or thick hard materials.

Disconnect power before cleaning or performing maintenance.